Features |
N/A
Velvet Flat Finish Available in Many Colors Excellent Washability |
Surface Preparation |
N/A Remove all dirt, grease, and loose, peeling paint. Sand previously painted surfaces. For best results, prime with the appropriate Warren primer. Use Vitric Enamel Undercoater to prime wood and surfaces previously painted with oil-based enamel. Satin Walco Primer/Sealer is excellent for new drywall and concrete. Super Block Filler is best for unpainted concrete block and rough concrete. Use a Metalcoat primer over steel or aluminum. Allow adequate dry time before finishing with Satin Walco. Self-priming is possible over drywall, plaster, and concrete. |
Mixing and Thinning |
N/A Stir or shake well. Thin sparingly with water to spray. Do not over-thin. |
Application |
N/A Brush, roll, spray. Thin as directed. Apply between 50 and 90ºF with the relative humidity less than 80%. Cover objects in the vicinity of painting to avoid paint drips or spatters. |
Dry Time |
N/A One hour to touch. Two hours to handle. 24 hours hard |
Recoat Time |
N/A After four hours. |
Appearance |
N/A Velvet-flat white finish. |
Composition |
N/A Rutile titanium dioxide, aluminum and magnesium silicate, and calcium carbonate. |
Vehicle |
N/A Vinyl acrylic copolymer emulsion. |
% Solids by Weight |
N/A 53.7 |
% Solids by Volume |
N/A 33.8 |
Coverage |
N/A 387 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile). Realistically 75-150 square feet per gallon over extremely rough surfaces. Approximately 400 square feet per gallon is possible over previously primed or painted drywall. |
V.O.C. |
N/A 0.25 lb/gal (31 g/l) with water; 0.69 lb/gal (83 g/l) without water. |
Cured Film Properties |
N/A Tough, flexible film with good washability. |
Standard Packaging |
N/A One gallon cans. Fives and drums are available by special order. |
