| Items |
1301 Satin Walco Interior Flat Latex Wall Paint |
 1603 Satin Enamatex Latex Semi-gloss Enamel |
||
| Description | Satin Walco is the premium flat latex wall paint of the Warren product line. It is ready to use after stirring, flows on smoothly, and dries to a velvet flat finish that is dry to touch in less than one hour. It is washable and scrubbable after 30 days, and has very low odor. | Satin Enamatex is the premium latex semi-gloss enamel in the Warren line of products. It is ready to use after stirring, flows on smoothly, and dries to a rich finish that is dry to touch in less than one hour. It is washable, scrubbable, and stain resistant after 30 days, and has very low odor | ||
| Features |
Velvet Flat Finish Available in Many Colors Excellent Washability |
Available in a Wide Range of Colors Top Quality Excellent Washability |
||
| Surface Preparation | Remove all dirt, grease, and loose, peeling paint. Sand previously painted surfaces. For best results, prime with the appropriate Warren primer. Use Vitric Enamel Undercoater to prime wood and surfaces previously painted with oil-based enamel. Satin Walco Primer/Sealer is excellent for new drywall and concrete. Super Block Filler is best for unpainted concrete block and rough concrete. Use a Metalcoat primer over steel or aluminum. Allow adequate dry time before finishing with Satin Walco. Self-priming is possible over drywall, plaster, and concrete. | Remove all dirt, grease, and loose, peeling paint. Sand previously painted surfaces. For best results, prime with the appropriate Warren primer. Use Vitric Enamel Undercoater to prime wood and surfaces previously painted with oil-based enamel. Satin Walco Primer/Sealer is excellent for new drywall and concrete. Super Block Filler is best for unpainted concrete block and rough concrete. Use a Metalcoat primer over steel or aluminum. Allow adequate dry time before finishing with Satin Enamatex. Self-priming is possible over drywall, plaster, and concrete. | ||
| Mixing and Thinning | Stir or shake well. Thin sparingly with water to spray. Do not over-thin. | |||
| Application | Brush, roll, spray. Thin as directed. Apply between 50 and 90ºF with the relative humidity less than 80%. Cover objects in the vicinity of painting to avoid paint drips or spatters. | |||
| Dry Time | One hour to touch. Two hours to handle. 24 hours hard | |||
| Recoat Time | After four hours. | After eight hours. | ||
| Appearance | Velvet-flat white finish. | Rich semi-gloss white film. | ||
| Composition | Rutile titanium dioxide, aluminum and magnesium silicate, and calcium carbonate. | Rutile titanium dioxide. | ||
| Vehicle | Vinyl acrylic copolymer emulsion. | |||
| % Solids by Weight | 53.7 | 48.5 | ||
| % Solids by Volume | 33.8 | 35.3 | ||
| Coverage | 387 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile). Realistically 75-150 square feet per gallon over extremely rough surfaces. Approximately 400 square feet per gallon is possible over previously primed or painted drywall. | 404 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile). Realistically 75-150 square feet per gallon over extremely rough surfaces. Approximately 400 square feet per gallon is possible over previously primed or painted drywall. | ||
| V.O.C. | 0.25 lb/gal (31 g/l) with water; 0.69 lb/gal (83 g/l) without water. | 0.72 lb/gal (86 g/l) with water; 1.65 lb/gal (197 g/l) without water. | ||
| Cured Film Properties | Tough, flexible film with good washability. | |||
| Standard Packaging | One gallon cans. Fives and drums are available by special order. | |||
|
|
||||
