Different surfaces require different chemistries. Various colors, dry times, VOCs, and levels of quality are available in the Warren line, so we have a primer for you whether you are refurbishing equipment or fabricating structural steel.
Request Information
Unit of Measure
Items
Fotosearch_k5645828

Metalcoat #16 Surface Protective Primer Surfacer Quick Drying Industrial Alkyd Surface Protective Primer
Fotosearch_k5645828

Low VOC Red Iron Oxide Industrial Heavy Duty Alkyd Surface Protective Primer
Description N/A Metalcoat #16 Primer Surfacer is designed to provide good adhesion to a variety of surfaces. The quick dry time and good corrosion resistance of this coating make this product an excellent choice for the demanding fabricator, manufacturer, or maintenance person. Since Metalcoat #16 Primer Surfacer is lacquer resistant, it may be recoated with any of Warren's single or two component coatings, whether solvent or waterborne, without fear of lifting. Metalcoat #16 Primer Surfacer may be used indoors or out and resists heat continuously up to 250ºF. Similar products are available in red and black and by special order, white and yellow. N/A VOC Compliant Red Iron Oxide Primer is designed to provide good adhesion to a variety of surfaces. The low V.O.C. of this coating and high performance in the field make this product an excellent choice for the demanding fabricator, manufacturer, or maintenance person. Red Iron Oxide Primer may be recoated with any of Warren's single component enamels, whether solvent or waterborne. When ordering, specify "high-build" if applying over 3 mils DFT. Also available in gray, black, and white by special order.
Features N/A Excellent Adhesion Over a Variety of Surfaces
Complete Coverage in One Coat
Good Corrosion Resistance 		N/A Excellent Adhesion Over a Variety of Surfaces
Fast dry
Rust inhibitive
Surface Preparation N/A Remove all dirt, scale, and grease. Commercial blast, sand, or wire brush for best results.
Mixing and Thinning N/A Stir or shake well. Thin up to 15% with S 46, Special Spraying Thinner or one of the many other specially formulated Warren reducers to spray. Ideal conventional spraying viscosity is 20-60" #2 Zahn depending on equipment. Thin sparingly when using airless equipment. Thin with Warren's S 40, High Flash Naphtha to brush or roll. Do not over-thin. N/A Stir or shake well. Thin up to 15% with S 4, Odorless mineral Spirits or S 3, VMP&P Naphtha to spray. Ideal conventional spraying viscosity is 20-60" #2 Zahn depending on equipment. Spray unthinned when using airless equipment. Do not over-thin.
Application N/A Brush, roll, spray. Thin as directed for conventional or H.V.L.P. spray. Airless and conventional are preferred spray methods. Apply between 50 and 95ºF with the relative humidity less than 80%. Do not expose to dew or rain within one hour after painting. Humidity can exceed 80% and dry times can be shortened if heat (no more than 250ºF) is applied after application.
Dry Time N/A 10 minutes to touch. 30 minutes to handle. Eight hours hard N/A 20-30 minutes to touch. 8-10 hours hard
Recoat Time N/A After 30 minutes with an approved Warren enamel. See your Warren representative for others. N/A Before two hours or after 24 hours with an approved Warren enamel.
Appearance N/A Flat gray film. N/A Flat reddish brown film.
Composition N/A Magnesium silicate, titanium dioxide, calcium carbonate, and modified zinc phosphate. N/A Magnesium silicate, red iron oxide, and zinc chromate.
Vehicle N/A TOFA chain-stopped and soya medium alkyd resins modified with phenolic and reduced with xylene, VM&P naphtha, and toluene. N/A Long oil alkyd reduced with mineral spirits.
% Solids by Weight N/A 59.8 N/A 62.82
% Solids by Volume N/A 38.6 N/A 41.0
Coverage N/A 413 square feet per gallon at 1.5 mils DFT (100% transfer and Zero profile). N/A 438 square feet per gallon at 1.5 mils DFT (100% transfer and zero profile).
V.O.C. N/A 4.15 lb/gal N/A 3.20 lb/gal
Cured Film Properties N/A Tough, durable film with good adhesion and corrosion resistance over steel and other substrates. N/A Tough, durable film with excellent adhesion and corrosion resistance over steel and other substrates.
Standard Packaging N/A One gallon cans. Fives and drums are available by special order. N/A Fifty-five gallon drums. Ones and fives are available by special order.