Warren Paint & Color Co.
Warren Paint & Color Co.
700 Wedgewood Ave. (at I-65)
Nashville, TN 37203
Tel: 615.292.6655
Toll Free: 800.251.2625
Email: AskUs@warrenpaint.com
Website: www.warrenpaint.com
Print Back
Warren's Quick Dry Enamels are formulated to withstand the elements and normal abuse. Quick Dry Enamels are ideal for factory application because they dry within minutes to a tack-free finish that fully cures within hours. Quick Dry Enamels are available in a wide range of colors and degrees of gloss, and they provide good exterior durability and corrosion resistance. Many common implement colors are in stock.

Warren's Tractor and Implement Enamels are formulated to withstand the elements and normal abuse. Tractor and Implement Enamels are ideal for factory application because they dry within minutes to a tack-free finish that fully cures within hours. Blending with V 13707, Urethane Hardener and thinning with S 31 or S 20 tremendously enhances chemical and abrasion resistance while being extremely competitive in price with automotive enamels. Tractor and Implement Enamels are available in a wide range of colors and degrees of gloss, and they provide good exterior durability and corrosion resistance.
Unit of Measure

Specifications

Features

 N/A Fast Drying
Weather and Corrosion Resistant
Ideal for Exterior Metal Structures and Equipment

Surface Preparation

 N/A Remove all dirt, scale, and grease. Prime with P 3987-01, #14 Red Oxide Primer or equivalent for best results. Check with your Warren representative for a wide variety of primer types and colors.

Mixing and Thinning

 N/A Stir or shake well. Thin up to 33% with S 46, Spraying Thinner or another recommended thinner to spray. Thin sparingly with S 40, High Flash Naphtha to brush. Do not over-thin.

Application

 N/A Brush, roll, spray. Thin as directed for conventional or H.V.L.P. spray. Apply between 50 and 95ºF with the relative humidity less than 80%. Do not expose to dew or rain within four hours after painting. Humidity can exceed 80% and dry times can be shortened if heat (no more than 300ºF) is applied.

Dry Time

 N/A 1/4 hour to touch. One hour to handle. Eight hours hard.

Recoat Time

 N/A Before one hour and after eight hours.

Appearance

 N/A High gloss white film.

Composition

 N/A Rutile titanium dioxide.

Vehicle

 N/A Tall oil fatty acid chain-stopped alkyd and acrylic polymer reduced with toluene, xylene, and VM&P naphtha.

% Solids by Weight

 N/A 51.6

% Solids by Volume

 N/A 35.63

Coverage

 N/A 404 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile).

V.O.C.

 N/A 4.61 lb/gal

Cured Film Properties

 N/A Good anticorrosive properties over steel and most metals. Good water and chemical resistance within eight hours. Good resistance to aliphatic solvents and many oils within seven days.

Standard Packaging

 N/A Fives and one gallon cans (packaged four per case). Drums are available by special order.