Features |
N/A
High Gloss Chemical and Abrasion Resistant Ideal for Interior Wood, Metal, and Concrete |
Surface Preparation |
N/A Remove all dirt, scale, grease, and wax. Prep uncoated wood surfaces with Warren's sanding sealer. |
Mixing and Thinning |
N/A Stir or shake well. Thin up to 33% with S 46, Spraying Thinner; S 3, VM&P Naphtha; or another recommended thinner to spray. Use as supplied or thin sparingly with S 4, Deodorized Thinner to brush or roll. Do not over-thin. |
Application |
N/A Brush, roll, spray. Thin as directed for conventional or H.V.L.P. spray. Apply between 50 and 95ºF with the relative humidity less than 80%. Do not expose to dew or rain within eight hours after painting. |
Dry Time |
N/A 1-1/2 hours to touch. Eight hours to handle. Twenty-four hours hard. |
Recoat Time |
N/A Before one hour and after eight hours. |
Appearance |
N/A High gloss mirror-like clear film. |
Composition |
N/A None |
Vehicle |
N/A Oil-modified Aromatic polyurethane reduced with mineral spirits. |
% Solids by Weight |
N/A 50.0 |
% Solids by Volume |
N/A 41.6 |
Coverage |
N/A 418 square feet per gallon at 1.6 mils DFT (100% transfer and zero profile). |
V.O.C. |
N/A 3.75 lb/gal |
Cured Film Properties |
N/A Good water and chemical resistance within twenty-four hours. Good resistance to aliphatic solvents and many oils within seven days. Excellent abrasion resistance. |
Standard Packaging |
N/A One gallon cans (packaged four per case). Fives and drums are available by special order |
