Features |
N/A
Undetectable Gloss / Glare Free Available in Green, Blue, White, and Black Superior Opacity and Specific Wavelength Profile |
Surface Preparation |
N/A Remove all dirt, grease, and loose, peeling paint. Sand previously painted surfaces. For best results, prime with the appropriate Warren primer. Use a Metalcoat primer over steel or aluminum. Allow adequate dry time before recoating. Self-priming is possible over drywall, plaster, and concrete. |
Mixing and Thinning |
N/A Stir or shake well. Thin sparingly with water to spray. Do not over-thin. |
Application |
N/A Brush, roll, spray. Thin as directed. Apply between 50 and 90ºF with the relative humidity less than 80%. Cover objects in the vicinity of painting to avoid paint drips or spatters. |
Dry Time |
N/A One hour to touch. Two hours to handle. 24 hours hard |
Recoat Time |
N/A After four hours. |
Appearance |
N/A Super-flat finish available in green, blue, white, and black. |
Composition |
N/A Rutile titanium dioxide, aluminum and magnesium silicate, and calcium carbonate. |
Vehicle |
N/A Vinyl acrylic copolymer emulsion. |
% Solids by Weight |
N/A 53.7 |
% Solids by Volume |
N/A 33.8 |
Coverage |
N/A 387 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile). Realistically 75-150 square feet per gallon over extremely rough surfaces. Approximately 300 square feet per gallon is possible over previously primed or painted drywall. |
V.O.C. |
N/A 0.25 lb/gal (31 g/l) with water; 0.69 lb/gal (83 g/l) without water. |
Cured Film Properties |
N/A Porous, open film subject to burnishing. |
Standard Packaging |
N/A One gallon cans. Fives and drums are available by special order. |