Call Us Toll-Free: 800.251.2625 | E-mail: AskMe@warrenpaint.com
All Categories > Architectural Coatings > Swimming Pool Paints > Item # 700  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 700, Tropical White Swimming Pool Paint



Warren's Swimming Pool Paints are formulated to have excellent adhesion to concrete and withstand constant immersion in fresh water. Warren's Swimming Pool Paints are ideal for brush, roller, or spray application due to their moderate dry times. They fully cure overnight and are recommended for application to interior and exterior concrete. Swimming Pool Paints are available in Tropical White and Ocean Blue (D 4133A), and they provide good durability and service in environments constantly exposed to water or moisture.




 Specifications   

Features

Excellent Water Resistance
Ideal for Concrete Pools and other Masonry Surfaces

Semigloss Finish

Surface Preparation

Remove all dirt, scale, and grease. Concrete surfaces should be etched with muriatic acid diluted with water (1:4), rinsed thoroughly, and allowed to dry. Swimming pools should be washed with a detergent solution prior to acid etching to remove oils. Epoxies must be removed prior to application of this coating for underwater use. Underwater surfaces must be bone dry prior to application. Test for moisture by taping clear plastic film to the surface to be painted and observing for condensation after four hours.

Mixing and Thinning

Stir or shake well. Thin up to 10% with S 3, VM&P Naphtha; or another recommended thinner to spray. Use as supplied to brush or roll. Do not over-thin.

Application

Brush, roll, spray. Thin as directed for conventional or H.V.L.P. spray. Apply between 50 and 95°F with the relative humidity less than 80%. Do not expose to water within four hours after painting.

Dry Time

One hour to touch. Eight hours until use or traffic is allowed. Forty-eight hours before immersion.

Recoat Time

After one hour.

Appearance

Semi-gloss white film

Composition

Titanium dioxide.

Vehicle

Vinyl toluene acrylate copolymer and tung oil reduced with high ?ash naphtha and mineral spirits.

% Solids by Weight

51.7

% Solids by Volume

38.6

Coverage

413 square feet per gallon at 1.5 mils DFT (100% transfer and Zero profile).

V.O.C.

4.42 LB/gal

Cured Film Properties

Excellent water resistance within 48 hours. Good resistance to aliphatic solvents and many oils within 48 hours.

Standard Packaging

One gallon cans (packaged four per case). Fives and drums are available by special order.


Copyright © 2011 Warren Paint & Color Co. , All Rights ReservedSite created by ThomasNet Web Solutions
Warren Paint & Color Co. - Evolving New Coating Solutions